Product Description:
SM9333-BCE-S-125-000 Pressure Sensor for Respiratory Anesthesia Machine
Features:
SM9000 series is a low-pressure digital calibration compensation MEMS pressure sensor with a pressure range as low as 125 Pa, and it adopts the JEDEC standard SOIC-16 package.
The SM9000 series offers a pressure range as low as 125 Pa and features a 16-bit I2C digital interface.
This type of low-pressure sensor can be used in gauge pressure and differential pressure configurations. It adopts the JEDEC standard SOIC-16 package and can be installed vertically or horizontally. The total error range after board installation and system-level automatic zeroing is less than 1%FS. The preheating behavior and long-term stability further confirm its expected performance during the service life of the parts.
Integrating the pressure sensor with the signal adjustment ASIC into a single package simplifies the use of silicon micromachining pressure sensors. This pressure sensor can be directly installed on a standard printed circuit board and can obtain calibration pressure signals from a digital interface. This eliminates the need for additional circuits, such as compensation networks or microcontrollers that contain custom correction algorithms.
column
SM9333
Packaging: Box
Pressure type: Differential
Working pressure :-0.02PSI to 0.02PSI (-0.12kPa to 0.13kPa)
Output type :I2C
Output :16 b
Accuracy :±3%
Voltage - Power supply :3V to 5.5V
Port size: Male - 0.12" (3mm) double-tube
Port style: With a backhook
Feature: Temperature compensation
Termination style: Gull-wing
Maximum pressure :1.02PSI (7kPa)
Operating temperature :-20°C to 85°C
Installation type: Surface mount type
Package/Housing :16-SOIC module, dual ports on top
Device packaging: SOIC-16, dual
Specifications:
| Working pressure | -0.02PSI to 0.02PSI (-0.12kPa to 0.13kPa) |
| Accuracy | ±3% |
| Output type | 16 b |
| Installation style | Surface mount type |
Product Tags:
|
|
YJJ SM9333-BCE-S-125-000 Pressure Sensor for Respiratory Anesthesia Machine Images
|
